CNC EDGE Banding Spindle Motor 0.35 kW / 0.8 kW Long Shaft, 12000-18000 RPM
The CNC EDGE Banding Spindle Motor is a specialized precision component engineered specifically for the demanding requirements of edge banding machines. Featuring a unique 'Long Shaft' architecture, this motor provides the mechanical clearance necessary for intricate edge finishing and trimming tasks that standard spindles cannot accommodate. Delivering a steady torque of 0.31 N.m, this motor operates efficiently across a speed range of 12,000 to 18,000 RPM at a frequency of 200 Hz. The robust 220V design is supported by high-quality P4 grade bearings (6005 & 6000), ensuring the dynamic stability and low runout required for high-quality board finishes. Ideal for industrial furniture production and commercial cabinetry, this spindle is built for the continuous duty cycles of modern woodworking production lines.
- Specialized Long Shaft design for extended reach in edge banding
- Variable speed performance from 12,000 to 18,000 RPM
- High-Precision P4 Grade Bearing Assembly (6005 & 6000)
- Industrial 200 Hz High-Frequency stable operation
- Consistent torque delivery of 0.31 N.m
- ER-11 Collet system for accurate tool holding
Comparative Technical Spindle Motor Configurations Matrix
Use the structural data catalog matrix below to evaluate power outputs, maximum RPM, operating voltages, and cooling styles across standard TriQuench CNC spindle models.
| Spindle Capacity | Operating Speed | Operating Voltage | Cooling System |
|---|---|---|---|
| 12.0 kW | 18,000 RPM | 380 V | Water-Cooled |
| 0.8 kW | 24,000 RPM | 220 V | Air-Cooled (Long Shaft) |
| 3.7 kW | 40,000 RPM | 380 V | Water-Cooled ISO20 |
| 9.0 kW | 18,000 RPM | 380 V | Air-Cooled |
Technical Specifications
| Technical Parameter | Engineering Specification Value |
|---|---|
| MODEL NUMBER | E08180S2238LS |
| POWER RATING | 0.35 kW / 0.8 kW (Long Shaft) |
| MAX SPEED | 18000 RPM |
| OPERATING VOLTAGE | 220 V AC |
| RATED CURRENT | 3.9 A |
| FREQUENCY | 200 Hz |
| RATED TORQUE | 0.31 N.m |
| POLE COUNT | 2 Pole |
| COLLET INTERFACE | ER-11 |
| BEARING CONFIGURATION | 6005 P4 (Front), 6000 P4 (Rear) |
| MECHANICAL | shaftType: Long Shaft | bodyType: EDGE Banding Specific Series |
Industrial Applications
| Usage Scenario | Target Industry |
|---|---|
| Industrial CNC EDGE Banding Machines | Commercial Furniture Manufacturing |
| Automated Woodworking Finishing Lines | Interior Joinery and Decoration |
| Precision Plywood and Board Edge Trimming | Woodworking Machine Tool OEM |
| Modular Kitchen and Cabinetry Fabrication | Cabinetry and Millwork Engineering |
| High-Speed Trimming in Furniture Production | Industrial Board Processing |
Technical FAQ & Operational Guide
What is the primary advantage of the 'Long Shaft' in this motor?
The long shaft provides the necessary physical distance between the motor body and the trimming tool. This clearance is vital in edge banding machines to allow the cutting head to reach the edge of boards without the motor housing interfering with the workpiece.
Does this motor work with both 12,000 and 18,000 RPM?
Yes, depending on the VFD configuration and frequency (up to 200 Hz), the motor can operate efficiently in this range to suit different board materials and feed speeds.
Is any special maintenance required for the long shaft design?
While the design is robust, it is important to ensure the ER-11 collet is kept clean and tools are balanced. The P4 grade bearings are factory-rated for high precision to handle the dynamic loads of the extended shaft.
Request Quote
Share your requirements, and we’ll provide a tailored quote.
