An edge banding spindle motor trims and finishes the banding material applied to panel edges in furniture/woodworking lines — built for continuous-duty, moderate-speed operation integrated into edge-banding machines.
- Compact Profile: Designed with a flattened or low-profile housing to fit within tight multi-station edge banders.
- High-Speed Trimming: Runs at 12,000 to 18,000 RPM for clean, tear-free trimming of PVC, ABS, and veneer tapes.
- Saw & Routing Variants: Configured for end-cutting saws, top/bottom trimmers, and corner rounding operations.
| Spindle Capacity | Operating Speed | Operating Voltage | Cooling System |
|---|---|---|---|
| 12.0 kW | 18,000 RPM | 380 V | Water-Cooled |
| 0.8 kW | 24,000 RPM | 220 V | Air-Cooled (Long Shaft) |
| 3.7 kW | 40,000 RPM | 380 V | Water-Cooled ISO20 |
| 9.0 kW | 18,000 RPM | 380 V | Air-Cooled |
Buying & Engineering Guide: Edge Banding Spindle Motor
Welcome to the technical specifications and procurement guide for TriQuench India's Edge Banding Spindle Motor portfolio. Engineered in Ahmedabad to strict ISO 1940 balancing standards, this specific Edge Banding Spindle Motor series offers precision-ground ceramic angular contact bearings, high rotational velocity thresholds up to 60,000 RPM, and minimal axial runout tolerances. Whether you are integrating these components into high-speed CNC routers, VMC milling stations, or specialized industrial automation rigs, our Edge Banding Spindle Motor line guarantees uncompromising mechanical accuracy and extended component longevity under continuous operational loads. Review the comprehensive Edge Banding Spindle Motor product matrix below to match essential parameters such as power output, mounting dimensions, and compatibility requirements for your specific production floor.
Technical Product Matrix: Edge Banding Spindle Motor Configurations
| Parameter Model | Key Capacity | Vibration Tolerance | Standard Grade |
|---|---|---|---|
| TriQuench Elite Series | High Speed Output | < 2.0 microns | ISO 1940 G0.4 |
| TriQuench Standard Series | Consistent Continuous Duty | < 5.0 microns | ISO 1940 G2.5 |
Frequently Asked Questions — Edge Banding Spindle Motor
What are the key selection criteria for a TriQuench Edge Banding Spindle Motor?
When choosing a Edge Banding Spindle Motor, you must verify the required torque curves, operational speed (RPM), cooling system (air vs water), voltage requirements, and standard tool interfaces (like ER collets or ISO tapers) to match your manufacturing setup.
How does TriQuench India ensure the quality of its Edge Banding Spindle Motor units?
Every TriQuench Edge Banding Spindle Motor is engineered in Ahmedabad and undergoes static and dynamic balancing according to ISO 1940 G0.4 grade specifications, keeping operational runout below 0.005mm to prolong bearing life.
What is the warranty and support policy for a Edge Banding Spindle Motor?
We provide standard manufacturer warranties on our Edge Banding Spindle Motor components, accompanied by dedicated technical support, replacement parts, and repair services directly from our factory hub in Ahmedabad.